Pricing guide
How to Bid on Retail Store Cleaning
Worked example
$924a month
Retail Store, 5,000 sq ft, 5x per week, with a $15.00 hourly wage.
See how it adds up- Typical size
- 1,000 to 15,000 sq ft for standalone retail; large retail/department stores run 15,000 to 100,000 sq ft
- Usual frequency
- 5-7x per week for most retail stores; high-traffic stores need daily cleaning
- Benchmark range
- $0.05 - $0.20 per sq ft per month at about 6 visits a week (frequency inferred from the source)
- Where this range comes from
What to watch for.
Customer-facing cleanliness standards
Retail managers judge cleanliness by what customers see: floors, glass, displays, and restrooms. A scuff on the floor or fingerprints on a glass door are more noticeable (and less tolerated) than in a back office. Your team needs to understand that presentation-grade cleaning is the standard, not basic maintenance.
Fitting rooms and display areas
Fitting rooms need daily attention: clothes left on floors, discarded hangers, mirror smudges, and occasionally worse. Display cases and shelving need dusting without disturbing the merchandise. Your cleaning crew needs to be trained on what they can and cannot move. Breaking a display item is an expensive mistake.
High foot traffic and entrance maintenance
Retail entrances see hundreds or thousands of people per day. During wet or snowy weather, the entrance mats and surrounding floor area can become hazardous. Some retail accounts include day porter service for entrance maintenance during business hours. Factor seasonal variation into your annual pricing.
Short cleaning windows
A store that closes at 9 PM and opens at 10 AM gives you a 13-hour window, but the practical window is often shorter due to overnight stocking crews, alarm system restrictions, and security protocols. Efficiency is essential. For mall stores, you may be sharing the space with vendors doing overnight merchandising.
How long the work takes.
The worked example starts from times based on ISSA's 540 Cleaning Times: upright vacuuming at 3,000 sq ft per hour, wet mopping at 2,500 sq ft per hour, restrooms at 3 minutes per fixture, trash removal at 80 cans per hour, horizontal dusting at 3,750 sq ft per hour, lobby cleaning at 15 minutes per lobby.
SolidBid applies a difficulty multiplier for this facility type (the range is 0.8-1.1x, and the calculator uses the low end).
Nightly vacuuming and mopping cover traffic lanes and entrances (about 30% of the floor), and weekly tasks such as dusting are spread across the week's visits. Project work is quoted separately and is not in the monthly price: window cleaning (interior).
Fixtures and displays slow vacuuming below the open-floor rate. Interior glass and mirrors run 10-15 panes per hour and are quoted separately from the monthly price. Fitting rooms add time per room, so count them.
A worked example.
A 5,000 sq ft retail clothing store with a sales floor, 4 fitting rooms, 1 public restroom, 1 employee restroom, a stockroom, and a front entrance. Cleaned 5 nights per week. Floor mix: 60% hard floor (polished concrete), 20% carpet (fitting rooms, office), 20% tile (restrooms, stockroom). Interior glass is quoted separately. The printed range assumes about 6 visits a week, so for 5 nights a week it is scaled down, and at $0.185 per sq ft this example sits about 5% above the top of the scaled range. The work itself comes to 1.42 hours a visit, under the 1.5 billable hours SolidBid charges for every visit, which is why the price is higher; the price check still counts it as within range, because it allows 15% either side.
| Line and how it’s worked out | Per month |
|---|---|
| Labor1.42 hours a visit × 21.65 visits a month × $15.00 an hour, plus 30% for payroll taxes and workers’ comp | $598 |
| Supplies$0.01 per sq ft a month for paper, soap, liners and chemicals | $50 |
| Overhead15% of labor and supplies, for the van, equipment, insurance and office | $97 |
| Profit and minimum chargeSolidBid bills at least 1.5 labor hours a visit, so the price is higher than the work alone. The work by itself comes to $877 a month. | $179 |
| Monthly price$0.185 per sq ft a month | $924 |
What the price covers
- Vacuuming (Upright): 300 sq ft of traffic lanes and entrances, every visit
- Mopping (Wet): 1,200 sq ft of traffic lanes and entrances, every visit
- Restroom Cleaning: 6 fixtures, every visit
- Trash Removal: 10 trash cans, every visit
- Dusting (Horizontal Surfaces): 5,000 sq ft, weekly
- Lobby / Entrance Cleaning: 1 lobby, every visit
- Quoted separately, not in the monthly price: Window Cleaning (Interior)
This is an example, not a quote. Wages, building conditions, restroom counts and scope all move the price, and the calculator lets you change each one.
Price this building with your own numbers.
The calculator starts from this example: 5,000 sq ft at 5x per week, with the same wage, margin and counts, so it shows the same price. Then enter what you pay and change anything that doesn’t match the building you’re bidding.
What buildings like this usually cost.
Benchmark range
$0.05 - $0.20 per sq ft per month at about 6 visits a week (frequency inferred from the source)
Where it comes from
Based on ISSA: retail $0.07-$0.15; Ziva Cleaning: $0.05-$0.20 (daily service, frequency inferred)
A price outside the range isn’t wrong on its own. Wages, restroom counts and scope move it. The calculator’s price check shows where a price sits against a range like this one.
Common scope of work.
- Vacuum all carpeted areas
- Dust mop and wet mop all hard floor surfaces
- Clean and mop tile floors
- Clean and sanitize all restrooms (restock supplies)
- Clean and reset fitting rooms (mirrors, floors, debris removal)
- Empty all trash receptacles and replace liners
- Clean entrance glass doors and windows
- Dust accessible display fixtures, shelving, and counters
- Wipe down checkout counters and POS stations
- Spot clean interior glass and mirrors
- Clean employee break area (if included in scope)
- Monthly: high dusting, baseboard cleaning, window detail
- Quarterly: floor deep scrub or carpet extraction in high-traffic areas
Get the walkthrough checklist for retail store cleaning
A free printable PDF to fill in on site: the counts the calculator asks for, the questions that change the price, and a page for notes and a floor sketch.
We’ll also send occasional emails about pricing cleaning bids. Unsubscribe any time.
Common questions.
How much does retail store cleaning cost?
In the worked example above, a 5,000 sq ft clothing store cleaned 5x per week comes to $924 a month. The work itself is under 1.5 hours a visit, so the price is set by SolidBid's floor of 1.5 billable hours per visit. Larger retail spaces (15,000+ sq ft) benefit from economies of scale and cost less per square foot. The price depends on floor type, number of restrooms, whether fitting rooms are included, and local labor rates. Stores with significant glass (storefronts, display cases) cost more due to the time-intensive glass cleaning.
Should I include day porter service in a retail cleaning bid?
Offer it as an optional add-on. Many retail stores need mid-day restroom checks, entrance floor maintenance, and spill response during business hours. Day porters are priced by the hour. Some stores only need a few hours of day porter coverage during peak times. Presenting it as a separate line item shows you understand retail operations and lets the store manager choose their coverage level.
What is the biggest mistake contractors make when bidding retail stores?
Underestimating the time for glass cleaning and display dusting. A retail store with a 30-foot glass storefront and dozens of display shelves requires significantly more time than an equivalently-sized office. Glass cleaning alone can add a lot of time per visit for a store with extensive glass. Walk the store before bidding and count the glass panels, mirrors, and display fixtures.
Keep reading.
- How to Calculate Commercial Cleaning Costs (2026 Guide)Plenty of cleaning contractors lose money on a contract because they guessed instead of calculating. Here is the step-by-step math behind a defensible commercial cleaning price.
- ISSA Cleaning Times Explained: What Every Contractor Should KnowISSA's 540 Cleaning Times are a widely used reference for estimating janitorial labor. If you are bidding without production rates, you are guessing. Here is what they are and how to use them.
- Commercial Cleaning Pricing: The Complete Per-Square-Foot GuidePer-square-foot pricing is the industry's common yardstick for commercial cleaning. Here are published benchmarks by facility type, what affects the rate, and how to use the numbers.
- How SolidBid works out a priceThe method, the sources, and what a price can’t know about your building.
Pricing guides for other buildings.
Office
Medical
Education
Financial
Property Management
Religious
Price this building now. It’s free.
No signup to see the price. When it’s right, the Bid Kit turns it into a proposal ready to send.
Open the calculator