Skip to content
SolidBidGet a free price

Pricing guide

How to Bid on Movie Theater Cleaning

Movie theater cleaning revolves around two realities: sticky floors and massive trash volume. Between showings, auditoriums need quick turnover cleaning. After the last show, the entire facility needs a deep clean before tomorrow's first matinee. Concession areas generate popcorn grease, spilled drinks, and candy wrappers everywhere. For contractors, theaters are steady 7-day-per-week accounts with above-average rates driven by the physical demands and the tight cleaning windows between shows.

Worked example

$2,955a month

Movie Theater, 20,000 sq ft, 7x per week, with a $15.00 hourly wage.

See how it adds up
Typical size
5,000 to 40,000 sq ft
Usual frequency
7x per week with between-show turnover cleaning and nightly deep clean
Benchmark range
$0.18 - $0.35 per sq ft per month at 5 visits a week
Where this range comes from

What to watch for.

The things that most often change the price of this kind of building.
  1. Sticky, greasy auditorium floors

    Spilled soda, melted candy, and popcorn butter make theater floors the stickiest in commercial cleaning. Standard mopping spreads the sticky residue around. You need hot water, degreaser, and often a floor machine to actually clean theater floors. Between-show quick cleans are limited to trash and visible debris; the real floor cleaning happens after the last show.

  2. Between-show turnover speed

    Theaters schedule 15-30 minutes between shows for cleaning. In that window, your crew needs to pick up trash, sweep aisles, wipe cup holders and armrests, and check restrooms. Speed is everything. The next audience is waiting. Multiple auditoriums turn over simultaneously, requiring enough staff to cover all theaters in the gap.

  3. Concession area grease

    Popcorn machines, nacho cheese dispensers, and drink stations generate grease and sticky residue that covers counters, equipment exteriors, and the surrounding floor area. Concession area cleaning is as intensive as restaurant kitchen cleaning. The popcorn machine exterior alone can take 15-20 minutes to properly degrease.

  4. Volume of trash and recycling

    A single sold-out auditorium can generate 10-15 large trash bags of popcorn bags, cups, candy boxes, and napkins. A 10-screen theater on a Friday night produces staggering amounts of trash. Your crew needs efficient collection systems and enough trash cart capacity to handle peak volume without multiple trips to the dumpster.

How long the work takes.

The worked example starts from times based on ISSA's 540 Cleaning Times: backpack vacuuming at 4,250 sq ft per hour, wet mopping at 2,500 sq ft per hour, restrooms at 3 minutes per fixture, trash removal at 80 cans per hour, lobby cleaning at 15 minutes per lobby.

SolidBid applies a difficulty multiplier for this facility type (the range is 1-1.3x, and the calculator uses the low end).

Nightly vacuuming and mopping cover traffic lanes and entrances (about 30% of the floor), and weekly tasks such as dusting are spread across the week's visits.

Auditorium deep cleaning, concession degreasing, and between-show turnover are priced from your own hours and are not in the example's monthly price.

A worked example.

Every line is worked out by the same pricing engine as the calculator.

A 20,000 sq ft 8-screen movie theater with 8 auditoriums (1,200 sq ft each), a 4,000 sq ft lobby and hallway, a 2,400 sq ft concession area, and 1,000 sq ft of restrooms (4 restrooms). Cleaned 7 nights per week. Floor mix: 60% carpet (auditoriums, lobby), 30% tile (concession, restrooms), 10% concrete (hallways). The example prices lobby floors, restrooms, and trash. Auditorium floor and seat deep cleaning, concession degreasing, and between-show turnover are not in the price, so add them from the hours they take. The printed range assumes 5 visits a week, so for 7 nights a week it is scaled up, and at $0.148 per sq ft this example sits about 36% below the bottom of the scaled range, which SolidBid's price check flags as below range. Published venue prices assume event-ready standards and cleaning during opening hours, which this example does not price, so a figure under the range is not surprising.

Movie Theater20,000 sq ft, 7x per week
How the monthly price for this example building is built
Line and how it’s worked outPer month
Labor3.36 hours a visit × 30.31 visits a month × $15.00 an hour, plus 30% for payroll taxes and workers’ comp$1,984
Supplies$0.01 per sq ft a month for paper, soap, liners and chemicals$200
Overhead15% of labor and supplies, for the van, equipment, insurance and office$328
Profit15% of the final price, a true margin rather than a markup$443
Monthly price$0.148 per sq ft a month$2,955

What the price covers

  • Vacuuming (Backpack): 3,600 sq ft of traffic lanes and entrances, every visit
  • Mopping (Wet): 2,400 sq ft of traffic lanes and entrances, every visit
  • Restroom Cleaning: 12 fixtures, every visit
  • Trash Removal: 40 trash cans, every visit
  • Lobby / Entrance Cleaning: 1 lobby, every visit

This is an example, not a quote. Wages, building conditions, restroom counts and scope all move the price, and the calculator lets you change each one.

Price this building with your own numbers.

The calculator starts from this example: 20,000 sq ft at 7x per week, with the same wage, margin and counts, so it shows the same price. Then enter what you pay and change anything that doesn’t match the building you’re bidding.

Open the calculator

What buildings like this usually cost.

Benchmark range

$0.18 - $0.35 per sq ft per month at 5 visits a week

Where it comes from

Based on Millennium Facility Services 2026: entertainment and venue $0.18-$0.35 at 5x/week

A price outside the range isn’t wrong on its own. Wages, restroom counts and scope move it. The calculator’s price check shows where a price sits against a range like this one.

Common scope of work.

Items to list in the proposal, so the client knows exactly what the price includes.
  1. Deep clean all auditorium floors nightly (sweep, degrease, mop or machine scrub)
  2. Wipe and sanitize all cup holders and armrests nightly
  3. Vacuum lobby and hallway carpet nightly
  4. Degrease and scrub concession area floors nightly
  5. Clean concession counters, equipment exteriors, and surrounding surfaces
  6. Deep clean all restrooms nightly (fixtures, walls, floors, restock)
  7. Empty all trash and recycling receptacles (high volume)
  8. Clean entrance glass, doors, and box office area
  9. Between-show turnover cleaning (trash pickup, aisle sweep, cup holder wipe, restroom check)
  10. Monthly: auditorium seat deep cleaning, lobby carpet extraction
  11. Quarterly: concession hood and equipment deep clean, window cleaning, high dusting

Get the walkthrough checklist for movie theater cleaning

A free printable PDF to fill in on site: the counts the calculator asks for, the questions that change the price, and a page for notes and a floor sketch.

We’ll also send occasional emails about pricing cleaning bids. Unsubscribe any time.

Common questions.

How much does movie theater cleaning cost?

In the worked example above, the base nightly cleaning of lobby floors, restrooms, and trash for a 20,000 sq ft, 8-screen theater comes to about $2,955 a month. Auditorium deep cleaning, concession degreasing, and between-show turnover are added from the hours they take. Per-screen pricing is another way to think about it, once you have priced the full scope.

How do I handle between-show turnover cleaning with tight schedules?

Staff based on simultaneous turnover count. If 4 auditoriums release at the same time and you have 15 minutes, you need 4 cleaners minimum. Use a rapid system: one person picks up trash from seat rows, one sweeps the aisle, one does a quick cup holder and armrest wipe, one handles lobby restroom check. Pre-stage trash bags and supplies outside each auditorium. Time your crew and optimize the process. Fifteen minutes per theater is achievable with practice.

What is the best way to clean sticky theater floors?

For nightly deep cleaning, use a walk-behind auto-scrubber with a heavy-duty degreaser and hot water. This is dramatically more effective and faster than manual mopping. For manual cleaning, use a bucket of hot water with concentrated degreaser, a deck brush for scrubbing, and a separate clean water rinse. Two-pass mopping (wash pass, then rinse pass) prevents residue buildup. Never use a single-bucket mop system in a theater, because you will just spread the sticky residue.

Price this building now. It’s free.

No signup to see the price. When it’s right, the Bid Kit turns it into a proposal ready to send.

Open the calculator