What Are ISSA 540 Cleaning Times?
ISSA's 540 Cleaning Times is a published table of production rates for janitorial tasks. Each entry says how many minutes a task takes, or how much area one cleaner covers per hour, for work such as vacuuming, mopping, restroom cleaning, and emptying trash. ISSA is the worldwide cleaning industry association, formerly the International Sanitary Supply Association.
Building service contractors, facility managers, and procurement teams use these times to estimate cleaning labor, compare bids, and set expectations for how long a job should take. They are the closest thing the commercial cleaning industry has to a common language for labor hours.
When a bid says its labor hours come from ISSA cleaning times, it means the hours were calculated from published rates instead of guessed. The times are a starting point. They do not account for your building, your equipment, or your crew, so you still adjust them.
Why ISSA Rates Matter for Your Business
If you bid without production rates, you are guessing how long a job will take. Guessing creates two problems:
- Underbidding: You estimate 3 hours for a job that takes 5. You win the bid because you are cheap, then lose money on every visit until you raise the price or walk away from the contract.
- Overbidding: You estimate 6 hours for a 3-hour job. You lose the bid to a competitor who calculated correctly, and you never get the chance to prove your quality.
Published times take the guesswork out. They give you a starting point you can adjust up or down for site conditions such as building age, obstruction density, cleaning frequency, and equipment quality.
They also add credibility to your proposals. When your bid says "labor hours calculated from ISSA 540 cleaning times," the facility manager can see you did the math.
Key ISSA Production Rates You Need to Know
These are the production rates SolidBid's calculator starts from, based on the ISSA 540 table. Each is shown as a range, with the midpoint used as the default.
Floor Care:
- Vacuuming (upright): 2,500-3,500 sq ft/hour (midpoint: 3,000)
- Vacuuming (backpack): 3,500-5,000 sq ft/hour (midpoint: 4,250)
- Wet mopping: 2,000-3,000 sq ft/hour (midpoint: 2,500)
- Dust mopping: 5,000-8,000 sq ft/hour (midpoint: 6,500)
- Floor buffing/burnishing: 10,000-15,000 sq ft/hour
- Floor stripping and waxing: 200-400 sq ft/hour
- Carpet shampooing: 500-1,000 sq ft/hour
Restrooms:
- Standard restroom cleaning: 2-4 minutes per fixture (a toilet, urinal, or sink), so a three-fixture restroom takes about 9 minutes
- Deep restroom cleaning: 30-45 minutes per restroom
General:
- Trash removal: 60-120 cans per hour (empty, wipe, and reline a can in about 45 seconds)
- Horizontal dusting: 3,000-4,500 sq ft/hour
- High dusting: 1,500-2,500 sq ft/hour
- Interior window cleaning: 10-15 panes per hour
- Kitchen/breakroom: 15-30 minutes per area
- Lobby/entrance: 10-20 minutes per entrance
- Elevator cleaning: 10-15 minutes per cab
- Stairwell cleaning: 10-20 minutes per floor
Specialty:
- Sanitizing/disinfecting: 2,000-3,500 sq ft/hour
- Biohazard/medical cleaning: 500-1,000 sq ft/hour
- Gym equipment wipe-down: 20-35 pieces per hour
- Locker room cleaning: 25-45 minutes per room
Each rate is a range because actual production depends on obstruction density (furniture, fixtures), surface condition, equipment quality, and cleaner experience.
How to Apply ISSA Rates to a Real Bid
Here is the practical process:
1. Define the scope. Walk the building (or use the floor plan) and list every task that needs to be performed per visit. Be specific: "vacuum carpeted offices" is better than "clean floors."
2. Measure or estimate areas. For each task, determine the area in square feet (for area-based tasks) or the count (for unit-based tasks like restroom fixtures and trash cans).
3. Look up the production rate. Start with the midpoint. Adjust upward for open, unobstructed spaces and newer buildings. Adjust downward for heavily furnished areas, older buildings, or specialty environments.
4. Calculate hours per task. For area-based tasks: square footage divided by production rate equals hours. For unit-based tasks: count divided by units per hour equals hours. For time-per-unit tasks: count multiplied by minutes per unit, divided by 60, equals hours.
5. Decide how often each task runs. Restrooms and trash happen every visit. Dusting is usually weekly. High dusting is usually monthly. Spread each task's hours across the visits it actually covers.
6. Sum all tasks. Add up the hours to get total hours per visit.
7. Apply labor costs and markups. Multiply total hours by your burdened labor rate, add supplies and overhead, then apply your profit margin.
This is the process SolidBid's calculator automates. You select the facility type and enter the specs, and the calculator applies the rates and does the math.
When to Adjust ISSA Rates Up or Down
ISSA rates are averages. Real-world conditions require adjustment.
Adjust rates down (slower production, more hours) when:
- The building is heavily furnished or has dense cubicle layouts
- Floors are in poor condition (old carpet, damaged VCT)
- The facility type demands extra care (medical, daycare, food service)
- Your crew is new to the building and has not optimized their route
- The building is multi-story with limited elevator access
Adjust rates up (faster production, fewer hours) when:
- Large open floor areas with minimal obstructions
- Using high-efficiency equipment (ride-on scrubbers, wide-path vacuums)
- Experienced crew with established routines on-site
- Newer building with good surface conditions
- Low-touch areas that only need maintenance cleaning
ISSA Rates by Facility Type
Different facility types take different amounts of effort for the same task, so SolidBid applies a difficulty multiplier by facility type on top of the base times. These multipliers are SolidBid's own adjustments, not ISSA figures. The calculator uses the low end of each range.
| Facility Type | Rate Multiplier | Reason |
|---|---|---|
| Standard office | 1.0x | Baseline |
| Executive/law office | 1.1-1.3x | Higher detail expected |
| Medical/dental | 1.5-2.0x | Biohazard, disinfection protocols |
| School (K-12) | 0.8-1.2x | Large areas, seasonal schedule |
| Church | 0.7-1.0x | Weekly cleaning, open spaces |
| Gym/fitness | 1.2-1.5x | Equipment, locker rooms |
| Restaurant | 1.3-1.8x | Grease, health code compliance |
| Warehouse | 0.5-0.7x | Large open areas, minimal detail |
| Retail | 0.8-1.1x | Standard with display care |
| Daycare | 1.2-1.6x | Child-safe products, detail sanitization |
| Hotel common areas | 1.2-1.6x | 24/7, hospitality standard |
SolidBid has facility-specific pricing pages for the most common types, with a worked example for each.
Where to Get the Full ISSA Rate Tables
ISSA publishes cleaning time guidance at issa.com, including an article on how to calculate cleaning times. Check ISSA directly for the current edition of the full table.
For day-to-day bidding, the rates listed above cover the tasks in most commercial scopes. SolidBid builds them into the calculator, so you do not need to look each one up to get an estimate.
How SolidBid Uses ISSA Cleaning Times
SolidBid's calculation engine starts from published production rates based on ISSA's 540 Cleaning Times. SolidBid is an independent tool, not an ISSA product. When you enter a facility type and square footage, the calculator:
- Selects the usual tasks for your facility type
- Looks up the production rate for each task
- Sets how often each task runs: some every visit, some weekly, some monthly. Project work such as interior windows and strip-and-wax is quoted separately
- Applies the facility-type difficulty multiplier
- Totals the labor hours per visit, including check-in, travel, and equipment cleanup
- Applies your wage and burden multiplier
- Adds supplies, overhead, and profit margin
- Compares the price against published per-square-foot ranges
The same inputs always give the same price, and every line of the math is shown. Try the free calculator to see it.



