Why Most Cleaning Companies Get Pricing Wrong
The most common pricing mistake is also the simplest: not knowing your numbers. A new contractor walks through a building, guesses it will take about four hours, multiplies by their hourly rate, and sends a quote. They win the bid because the price is low. Six months later, they are earning less than minimum wage once taxes, insurance, supplies, and drive time come out.
Accurate commercial cleaning pricing is not guesswork. It is math. The inputs are well defined: square footage, task list, production rates, labor costs, burden rate, supplies, overhead, and profit margin. When you calculate each component, you get a number you can explain to any client. More importantly, you get a number that makes you money.
The Five Components of Cleaning Cost
Every commercial cleaning price is built from five cost layers. Miss any one of them and your bid leaks money.
- Direct labor cost: the hours your cleaners spend on site, multiplied by their burdened hourly rate.
- Supply cost: cleaning chemicals, paper products, trash liners, and other consumables used on the job.
- Overhead: business costs that are not tied to any single job, such as insurance premiums, vehicle costs, admin time, phone, software, and equipment depreciation.
- Profit margin: what you earn after covering all costs. This is not optional. If you are not building profit into every bid, you are running a charity.
- Equipment amortization: for accounts that need specialty equipment (auto-scrubbers, carpet extractors), spread the equipment cost across the accounts that use it.
Here is each one in detail.
Step 1: Estimate Labor Hours Using Production Rates
Labor is your biggest cost, typically 50-65% of the total price. The foundation of an accurate labor estimate is production rates: how much area one cleaner covers per hour, or how many minutes a task takes, for each task.
SolidBid uses the times in ISSA's 540 Cleaning Times table, a published list of how long each cleaning task takes. These are the main ones:
- Vacuuming (upright): 3,000 sq ft per hour
- Vacuuming (backpack): 4,250 sq ft per hour
- Wet mopping: 2,500 sq ft per hour
- Dust mopping: 6,500 sq ft per hour
- Restroom cleaning: 3 minutes per fixture (a toilet, urinal, or sink)
- Trash removal: 80 cans per hour (about 45 seconds per can)
- Horizontal dusting: 3,750 sq ft per hour
- Kitchen or breakroom: 22 minutes per kitchen
- Lobby or entrance: 15 minutes per lobby
Three rules keep the estimate realistic:
- Count restrooms by fixture. A typical commercial restroom has three fixtures, so four restrooms is 12 fixtures.
- Nightly floor work covers traffic lanes, not wall to wall. Nightly vacuuming and mopping hit entrances and main routes, roughly 30% of the floor. The full-floor pass is periodic work.
- Weekly tasks happen weekly. Dusting is done once a week, so its hours are spread across the visits in that week.
Example for a 10,000 sq ft office (50% carpet, 30% hard floor, 20% tile, 4 restrooms, 20 trash cans, one breakroom, one lobby) cleaned five nights a week:
| Task | Calculation | Hours per visit |
|---|---|---|
| Vacuum | 1,500 sq ft (30% of 5,000 sq ft carpet) / 3,000 | 0.50 |
| Wet mop | 1,500 sq ft (30% of 5,000 sq ft hard floor and tile) / 2,500 | 0.60 |
| Restrooms | 12 fixtures x 3 min | 0.60 |
| Trash | 20 cans / 80 per hour | 0.25 |
| Dusting | 10,000 sq ft / 3,750 = 2.67 hours once a week, spread over 5 visits | 0.53 |
| Kitchen or breakroom | 22 min | 0.37 |
| Lobby | 15 min | 0.25 |
| Check-in, travel, and equipment cleanup | 12 min | 0.20 |
| Total | 3.30 hours |
Interior window cleaning is not in the table. It is project work, so you quote it separately rather than folding it into the monthly price. SolidBid's calculator runs these steps for you using the same times.
Step 2: Calculate Your Burdened Labor Rate
Your burdened labor rate is what an employee actually costs you per hour, not just their hourly wage. The burden includes:
- FICA taxes (Social Security and Medicare): 7.65% of wages
- Federal unemployment (FUTA): 0.6% of the first $7,000 per employee
- State unemployment (SUTA): varies by state and by your claims history
- Workers compensation insurance: varies by state. For janitorial work (NCCI class 9014), the national average is about $2.43 per $100 of payroll, with state rates ranging from under $1 in Texas to about $3.58 in Rhode Island. California and New York use different class codes and run higher.
- Health insurance, PTO, and other benefits: varies by company
The industry shorthand is a burden multiplier. For a part-time night crew with no benefits in an average workers' comp state, it lands around 1.25 to 1.30. A high-cost state or modest benefits push it to 1.35-1.45, and a full-time crew with real benefits can pass 1.50.
- A $15/hour cleaner with a 1.30 burden multiplier costs you $19.50/hour
- A $18/hour cleaner with a 1.35 burden multiplier costs you $24.30/hour
If you pay $15/hour and only bill for $15/hour worth of work, you are losing $4.50/hour before you even consider supplies, overhead, or profit.
To calculate your own burden multiplier, add up your total annual payroll costs (including all taxes and benefits) and divide by total annual gross wages. That ratio is your multiplier.
Step 3: Add Supply Costs
Cleaning supplies include chemicals, paper products (toilet paper, paper towels, hand soap), trash liners, microfiber cloths, mop heads, and other consumables.
Trade publications put paper products alone at about $0.06 to $0.08 per square foot per year, which is $0.005 to $0.007 per square foot per month. Adding chemicals, liners, and other expendables brings a typical total to about $0.01 per square foot per month. SolidBid uses $0.01 as its default.
This is a monthly figure, not a per-visit figure. Multiplying it by every visit overstates supplies many times over. For a 10,000 sq ft office:
- Supply cost per month = 10,000 sq ft x $0.01 = $100/month
Your number will move with the account. If the client buys the paper products, your cost drops. Medical, food service, and public buildings use more, so raise the figure for them.
Track your actual supply costs per account after a few months, and adjust future bids based on real data.
Step 4: Factor in Overhead
Overhead is every cost of running your business that is not directly tied to a cleaning job. This includes:
- Office rent and utilities
- Vehicle costs (payments, insurance, fuel, maintenance)
- Equipment depreciation
- Admin salaries (your salary, bookkeeper, dispatcher)
- Phone and internet
- General liability insurance premiums
- Software (accounting, CRM, scheduling)
- Marketing costs
- Professional development and training
Overhead is typically expressed as a percentage of direct costs. Published bidding guidance from Cleaning & Maintenance Management puts overhead at roughly 10-18% on small and mid-size accounts and 5-6% on large ones.
To calculate your overhead percentage, total your annual overhead costs, divide by total annual direct costs (labor plus supplies across all accounts), and multiply by 100. If your overhead is $50,000 a year and your direct costs are $300,000 a year, your overhead rate is 16.7%.
Step 5: Build in Your Profit Margin
Profit is not what is left over after expenses. Profit is a line item in your bid, calculated before you send the quote.
Published margin guidance varies by account size. Cleaning & Maintenance Management puts large accounts at 3-8%, medium accounts at 10-20%, and small accounts at 25-40%. For a mid-size account, 15% is a reasonable starting point.
The formula: take your total costs (labor plus supplies plus overhead) and divide by (1 minus your profit margin).
Example: if your total costs for a job are $3,000/month and your target profit is 15%:
- Monthly price = $3,000 / (1 - 0.15) = $3,000 / 0.85 = $3,529/month
- Your profit = $529/month
Do not add profit to your costs. If you calculate $3,000 in costs and add 15% to get $3,450, your actual margin is only 13%. Use the division method to get the correct number.
Worked Example: 10,000 sq ft Office Building
Here is a complete example with all the pieces together, using the same office as Step 1.
- Facility
- 10,000 sq ft mid-size office
- Floor mix
- 50% carpet, 30% hard floor, 20% tile
- Restrooms
- 4 (12 fixtures)
- Trash cans
- 20
- Frequency
- 5x per week (21.65 visits per month)
- Labor rate
- $16/hour
- Burden multiplier
- 1.30 (burdened rate = $20.80/hour)
Step 1: Labor hours per visit
3.30 hours, from the table in Step 1 above.
Step 2: Monthly labor cost
- 3.30 hours x $20.80/hour = $68.64 per visit
- $68.64 x 21.65 visits = $1,486/month
Step 3: Monthly supply cost
- 10,000 sq ft x $0.01 = $100/month
Step 4: Overhead (15%)
- ($1,486 + $100) x 0.15 = $238/month
Step 5: Total cost
- $1,486 + $100 + $238 = $1,824/month
Step 6: Apply the profit margin (15%)
- $1,824 / 0.85 = $2,146/month
Per-square-foot check: $2,146 / 10,000 = $0.215 per sq ft per month
Interior window cleaning is not in this price. Quote it separately as project work.
That is above the published office ranges of $0.09-$0.17 per sq ft per month (ISSA) and $0.12-$0.18 (a contractor pricing guide). Those ranges do not say what wage, scope, or frequency they assume, so use them as a sanity check, not a target. If your own number lands well outside the range, re-check your restroom count, trash cans, and wage first.
If a client asks why your price is $2,146, you can walk them through the math line by line.
Common Pricing Mistakes to Avoid
Forgetting burden rate. If you price labor at the employee's hourly wage, you are underpricing every job by 25-40%.
Ignoring overhead. Your truck, insurance, phone, and accounting time are real costs. They do not disappear because you left them out of the bid.
Leaving profit to chance. "Whatever is left over" is not a profit strategy. Build the margin into the price formula.
Bidding by feel instead of calculation. Walking a building and guessing is how you end up cleaning for free. The production-rate method gives you a defensible number once you have the rates.
Not adjusting for facility type. A medical office takes much longer per square foot than a standard office because of disinfection steps and dwell times. SolidBid applies a difficulty multiplier by facility type, and if you build your own spreadsheet you should add one too.
Forgetting travel time. If your crew drives 30 minutes each way to a job site, that is an hour of paid labor per visit that is not producing revenue. For distant accounts, factor drive time into your cost.
Use SolidBid to Skip the Spreadsheet
The math above is straightforward, but doing it by hand for every bid takes time. SolidBid's free calculator runs every step. Enter your facility type, square footage, and a few details, and it returns a monthly price range built from published ISSA 540 cleaning times and your own wage, overhead, and margin. It starts from a default wage for your state, and you can change any input.
Once the price is settled, SolidBid's proposal builder turns it into a finished client proposal with the scope, frequency, and pricing laid out.



