What Is Per-Square-Foot Pricing?
Per-square-foot pricing expresses the cost of commercial cleaning as a rate: dollars per square foot per month (or per visit). It is the standard way the industry benchmarks pricing across different building types and sizes.
When a facility manager says "we are paying $0.12 per square foot," they mean the monthly cleaning cost divided by the total cleanable square footage equals $0.12. For a 10,000 sq ft building at $0.12/sq ft, that is $1,200 per month.
Per-square-foot pricing is useful because it normalizes costs across buildings of different sizes and makes it easy to compare bids. But it is a benchmark, not a formula. The actual rate depends on the facility type, scope of work, cleaning frequency, local labor market, and other factors.
2026 Pricing Benchmarks by Facility Type
Here are published per-square-foot monthly ranges for common commercial facility types, with where each one comes from. Most published ranges do not say what cleaning frequency they assume, so treat them as a rough guide, not a quote.
| Facility Type | $/sq ft/month | Source | Frequency stated |
|---|---|---|---|
| Office | $0.09 - $0.17 | ISSA | Not stated |
| Office | $0.12 - $0.18 | millfac.com | 5 nights a week, day porter as applicable |
| Medical/dental | $0.14 - $0.29 | ISSA | Not stated |
| Medical/dental | $0.18 - $0.30 | millfac.com | 5x/week plus porter |
| School | $0.07 - $0.14 | ISSA | Not stated |
| Retail | $0.07 - $0.15 | ISSA | Not stated |
| Warehouse/industrial | $0.08 - $0.20 | ISSA | Not stated |
| Restaurant | $0.12 - $0.40 | zivacleaning.com | Nightly |
| Church | $0.05 - $0.25 | harrisfac.com, zivacleaning.com | Once a week |
| Bank/financial | $0.07 - $0.25 | zivacleaning.com | Not stated |
| Manufacturing | $0.15 - $0.28 | millfac.com | 5x/week |
| Entertainment venue | $0.18 - $0.35 | millfac.com | 5x/week |
A second check comes from building owners instead of cleaning companies. BOMA's 2016 Experience Exchange Report put the cleaning cost of private-sector office buildings in the US at $1.52 per sq ft per year, about $0.13 per month in 2016 dollars. That lands in the middle of the published office ranges, and with ten years of cost increases since, a current office price sits near the top of them.
For facility-specific pricing guides with worked examples, visit our facility type pages.
Big-city markets trend toward the high end of any range and lower-cost markets toward the low end. The difference is mostly local labor rates.
What Affects Per-Square-Foot Pricing
The per-square-foot rate is not random. These are the primary factors that push the rate up or down.
Facility Type
The single biggest factor. Published ranges for medical offices ($0.14-$0.29 per sq ft per month from ISSA) sit well above those for schools ($0.07-$0.14) because the cleaning complexity, required products, and production rates are different. Compare your price to the range for the specific facility type, not to a generic "commercial cleaning" average.
Cleaning Frequency
More frequent cleaning costs more per month but less per visit. Using SolidBid's engine on a 10,000 sq ft office (four restrooms, $16/hour wage, 1.30 burden, 15% overhead, 15% margin):
| Visits per week | Monthly price | Price per visit |
|---|---|---|
| 2 | $1,134 | $131 |
| 3 | $1,472 | $113 |
| 5 | $2,146 | $99 |
| 7 | $2,820 | $93 |
Going from five visits a week to two cuts the monthly price to about 53% of the five-visit price, not 40%. The per-visit price rises as frequency falls because fixed time (check-in, travel, equipment cleanup) and weekly tasks such as dusting are spread over fewer visits. Published ranges usually assume the typical frequency for the facility type, so match your frequency to the benchmark before you compare.
Scope of Work
A basic scope (vacuum, mop, trash, restrooms) costs less than a full scope that adds window cleaning, high dusting, equipment sanitization, and kitchen deep cleaning. When comparing your price to benchmarks, make sure you are comparing the same scope. A bid at $0.10/sq ft with a bare-bones scope is not cheaper than a bid at $0.14/sq ft that includes everything.
Building Size
Larger buildings usually cost less per square foot. Fixed time (drive time, check-in, setup, equipment cleanup) is spread across more square footage, and equipment such as backpack vacuums and auto-scrubbers works better in large open areas. Small accounts also cost more per square foot because a small account has the same admin load as a large one. SolidBid's calculator bills at least 1.5 labor hours for every visit, so a very small building is not priced below the cost of sending a cleaner out, and you can set your own monthly minimum on top of that.
Local Labor Market
Labor is 50-65% of the cleaning price, so wages move the price. The Bureau of Labor Statistics puts the median wage for janitors and cleaners at $17.71 per hour (May 2025), and $17.21 for those working for building service contractors. The bottom 10% earn under $13.77 and the top 10% earn over $24.17. SolidBid's calculator starts from a default wage for your state, which you can change.
Floor Types
Hard floor mopping is slower than carpet vacuuming with a backpack vacuum. A building that is 80% tile will have higher labor hours per sqft than one that is 80% carpet (assuming backpack vacuum use). However, carpet requires periodic shampooing which is a separate cost. The floor mix affects both the per-visit time and the periodic deep cleaning schedule.
How to Use Per-Square-Foot Benchmarks
Per-sqft benchmarks are a sanity check, not a pricing method. Here is the right way to use them:
1. Calculate your price first. Use production rates, your actual labor costs, and your specific scope to determine the monthly price. See our step-by-step guide.
2. Convert to per-sqft. Divide your monthly price by the total square footage.
3. Compare to the benchmark. If your number falls within the range for that facility type, you are in the right ballpark. If it is well outside the range, investigate why.
4. Adjust if necessary. If your price is significantly above the benchmark, check whether your production rates are too conservative, your overhead is too high, or your scope includes tasks that push it above the standard. If it is below, check that you have not missed scope items or underestimated hours.
Do not set your price BY the benchmark. Saying "the benchmark is $0.12, so I will charge $0.12" ignores your actual costs. The benchmark tells you where the market is. Your calculation tells you what the job costs you. If there is a gap, you need to understand why before adjusting.
SolidBid's calculator shows both your calculated price and the market benchmark for your facility type, so you can see exactly where you stand.
Why Per-Visit Pricing Is Also Useful
While per-sqft is the standard benchmark, per-visit pricing is useful for scheduling and profitability analysis.
Per-visit price = monthly price / number of visits per month.
For a $2,000/month contract with 21.7 visits (5x/week): $2,000 / 21.7 = $92.17 per visit.
This tells you how much revenue each visit generates. Compare that to your per-visit cost (labor hours x burdened rate + supplies) to see your per-visit margin. If you are making $12 per visit on one account and $45 per visit on another, that informs which types of accounts to pursue.
Regional Pricing Variations
Per-square-foot rates vary by region because labor, overhead, and margin vary. One published estimate puts New York, San Francisco, Boston, and Washington DC at 25-45% above the national figure, and rural parts of the South and Midwest at 10-20% below it. Premium and union buildings in Manhattan can run much higher.
Treat these as rough guides. Start from your local wage and your real costs, then check the result against the benchmark. Select your state in the calculator to start from a local default wage.
Get Your Per-Square-Foot Price Instantly
SolidBid's free calculator gives you an instant per-square-foot price based on your specific facility type, size, scope, and location. It shows you the market benchmark alongside your calculated price so you can bid with confidence.
Try the free calculator. No signup required.



