Pricing guide
How to Bid on Airport Terminal Area Cleaning
Worked example
$41,128a month
Airport Terminal Area, 200,000 sq ft, 7x per week, with a $17.00 hourly wage.
See how it adds up- Typical size
- 50,000 to 500,000+ sq ft per terminal
- Usual frequency
- 24/7 continuous cleaning with day crews and night crews
What to watch for.
24/7 operations with no downtime
Airports never close. Passengers are present at all hours, with peak periods from 5 AM to 10 PM. Your crew needs to clean around travelers, luggage, and queues continuously. Night shifts handle deep cleaning, but the facility is never empty. This requires a multi-shift staffing model with clean handoffs between crews.
TSA security clearances
Every employee working in an airport terminal needs a security badge that requires TSA background checks. The clearance process can take weeks per employee. You need to maintain a pipeline of cleared workers because turnover in airport cleaning is higher than average due to the demanding environment. Budget for the administrative cost and time of the security process.
Massive floor area and equipment requirements
Terminal floors covering hundreds of thousands of square feet require ride-on scrubbers, industrial carpet extractors, and large-scale equipment. The equipment investment for an airport contract is large. The equipment needs to be maintained and stored on-site, adding facility cost to your bid.
Restroom volume and frequency
A major airport terminal may have 30-50+ restrooms that need continuous attention. During peak hours, restrooms need checking and restocking every 30-60 minutes. This requires dedicated restroom attendants in addition to deep cleaning crews. Restroom staffing alone can be a large share of the daytime labor budget.
How long the work takes.
The worked example starts from times based on ISSA's 540 Cleaning Times: backpack vacuuming at 4,250 sq ft per hour, wet mopping at 2,500 sq ft per hour, restrooms at 3 minutes per fixture, restroom deep cleaning at 37 minutes per restroom, trash removal at 80 cans per hour, lobby cleaning at 15 minutes per lobby, elevators at 12 minutes per cab.
SolidBid applies a difficulty multiplier for this facility type (the range is 1.2-1.6x, and the calculator uses the low end).
Nightly vacuuming and mopping cover traffic lanes and entrances (about 30% of the floor), and weekly tasks such as dusting are spread across the week's visits. Project work is quoted separately and is not in the monthly price: window cleaning (interior).
Escalators, daytime restroom rounds, and the day porter team are priced by hours and are not in the monthly price. Ride-on scrubbers are what make large terrazzo corridors affordable.
A worked example.
A 200,000 sq ft airport terminal section with concourse seating, gate areas, a food court, 30 restrooms, 12 elevator cabs, and common corridors. Cleaned nightly by a night crew. Floor mix: 50% terrazzo (hard floor), 30% carpet (gate areas), 20% tile (restrooms, food court). Day porter coverage, escalator cleaning, and daytime restroom rounds are quoted separately and are not in the monthly price.
| Line and how it’s worked out | Per month |
|---|---|
| Labor42.22 hours a visit × 30.31 visits a month × $17.00 an hour, plus 35% for payroll taxes and workers’ comp | $29,369 |
| Supplies$0.01 per sq ft a month for paper, soap, liners and chemicals | $2,000 |
| Overhead18% of labor and supplies, for the van, equipment, insurance and office | $5,646 |
| Profit10% of the final price, a true margin rather than a markup | $4,113 |
| Monthly price$0.206 per sq ft a month | $41,128 |
What the price covers
- Vacuuming (Backpack): 18,000 sq ft of traffic lanes and entrances, every visit
- Mopping (Wet): 42,000 sq ft of traffic lanes and entrances, every visit
- Restroom Cleaning: 90 fixtures, every visit
- Restroom Deep Cleaning: 90 fixtures, monthly
- Trash Removal: 400 trash cans, every visit
- Lobby / Entrance Cleaning: 1 lobby, every visit
- Elevator Cleaning: 12 elevators, every visit
- Quoted separately, not in the monthly price: Window Cleaning (Interior)
This is an example, not a quote. Wages, building conditions, restroom counts and scope all move the price, and the calculator lets you change each one.
Price this building with your own numbers.
The calculator starts from this example: 200,000 sq ft at 7x per week, with the same wage, margin and counts, so it shows the same price. Then enter what you pay and change anything that doesn’t match the building you’re bidding.
What buildings like this usually cost.
Benchmark range
$0.155 - $0.23 per sq ft per month at 7 visits a week
Where it comes from
An estimate from SolidBid's cost model, not a published rate
A price outside the range isn’t wrong on its own. Wages, restroom counts and scope move it. The calculator’s price check shows where a price sits against a range like this one.
Common scope of work.
- Machine scrub all terrazzo and hard floors nightly
- Vacuum all carpeted gate and seating areas nightly
- Degrease and scrub food court floors nightly
- Deep clean all restrooms nightly (floors, fixtures, walls, restock)
- Daytime restroom rounds every 60 minutes (check, restock, tidy)
- Clean all elevator cabs (walls, tracks, buttons, floors)
- Clean all escalators and moving walkways
- Empty all trash receptacles throughout terminal
- Daytime gate area maintenance (seating wipe, trash, floor spot cleaning)
- Daytime food court table busing and spill response
- Clean baggage claim areas
- Monthly: high dusting of terminal ceilings, signage cleaning
- Quarterly: carpet deep extraction, terrazzo polishing, window cleaning
Get the walkthrough checklist for airport terminal area cleaning
A free printable PDF to fill in on site: the counts the calculator asks for, the questions that change the price, and a page for notes and a floor sketch.
We’ll also send occasional emails about pricing cleaning bids. Unsubscribe any time.
Common questions.
How much do airport cleaning contracts cost?
In the worked example above, a 200,000 sq ft terminal section cleaned nightly comes to about $41,128 a month for the night crew. Day porter staffing, escalators, and daytime restroom rounds are priced by hours on top. These are among the largest contracts in commercial cleaning.
How do I qualify to bid on airport cleaning?
Airport RFPs typically require substantial commercial cleaning experience, current contracts of similar size, financial statements proving you can handle the cash flow, elevated insurance limits, TSA compliance capabilities, and references from comparable accounts. Subcontracting to a larger airport cleaning firm first can build your experience and references for eventually bidding prime contracts.
What is the biggest operational challenge in airport cleaning?
Staffing. Airport cleaning has higher turnover than standard commercial cleaning because of the security clearance process, the 24/7 shifts, and the physical demands. You need a continuous pipeline of workers going through TSA background checks to replace departures. Plan for turnover and keep a bench of cleared workers ready to fill gaps. Understaffing an airport contract triggers immediate performance penalties.
Keep reading.
- How to Calculate Commercial Cleaning Costs (2026 Guide)Plenty of cleaning contractors lose money on a contract because they guessed instead of calculating. Here is the step-by-step math behind a defensible commercial cleaning price.
- ISSA Cleaning Times Explained: What Every Contractor Should KnowISSA's 540 Cleaning Times are a widely used reference for estimating janitorial labor. If you are bidding without production rates, you are guessing. Here is what they are and how to use them.
- Commercial Cleaning Pricing: The Complete Per-Square-Foot GuidePer-square-foot pricing is the industry's common yardstick for commercial cleaning. Here are published benchmarks by facility type, what affects the rate, and how to use the numbers.
- How SolidBid works out a priceThe method, the sources, and what a price can’t know about your building.
Pricing guides for other buildings.
Office
Medical
Education
Financial
Property Management
Religious
Price this building now. It’s free.
No signup to see the price. When it’s right, the Bid Kit turns it into a proposal ready to send.
Open the calculator