Skip to content
SolidBidGet a free price

Pricing guide

How to Bid on Auto Repair Shop Cleaning

Auto repair shop cleaning is industrial cleaning focused on grease, oil, and heavy-duty floor care. The shop bays are the hardest part: decades of oil stains, brake dust, and tire residue embedded in concrete floors. The customer-facing areas (waiting room, restroom, front counter) need retail-level cleanliness because customers judge the shop by what they see. Most auto shops are cleaned 2-3x per week, making them a lower-frequency but steady account.

Worked example

$657a month

Auto Repair Shop, 8,000 sq ft, 3x per week, with a $16.00 hourly wage.

See how it adds up
Typical size
2,000 to 15,000 sq ft
Usual frequency
2-3x per week for shop areas; offices and customer areas may need 5x per week
Benchmark range
$0.045 - $0.095 per sq ft per month at 3 visits a week
Where this range comes from

What to watch for.

The things that most often change the price of this kind of building.
  1. Oil and grease on shop floors

    Auto shop floors have embedded oil stains and fresh spills. Standard mopping does nothing. You need industrial degreasers, potentially hot water pressure washing, and absorbent materials for fresh spills. Some shops want floor cleaning only; others want a full degrease. The level of floor restoration expected dramatically affects your price.

  2. Safety hazards in the shop

    Your crew is working around lifts, jack stands, fluid drains, and potentially running vehicles. Slip hazards from oil are ever-present. Your team needs closed-toe boots (steel toe preferred), safety glasses in the shop area, and awareness of lift and equipment hazards. Cleaning when the shop is closed and vehicles are down is safest.

  3. Customer area expectations vs. shop reality

    The customer waiting room needs to be clean and comfortable. These are retail-level expectations. But it is 50 feet from an active grease pit. Oil tracks from technicians walking between the shop and front area is a constant battle. Entry mats and transition zone cleaning are essential to prevent the shop from contaminating the customer space.

How long the work takes.

The worked example starts from times based on ISSA's 540 Cleaning Times: wet mopping at 2,500 sq ft per hour, restrooms at 3 minutes per fixture, trash removal at 80 cans per hour, lobby cleaning at 15 minutes per lobby.

SolidBid applies a difficulty multiplier for this facility type (the range is 0.7-1x, and the calculator uses the low end).

Nightly vacuuming and mopping cover traffic lanes and entrances (about 30% of the floor), and weekly tasks such as dusting are spread across the week's visits. Shop floor degreasing is much slower than office mopping and is quoted separately.

The example prices the customer areas, restrooms, and routine floor care.

A worked example.

Every line is worked out by the same pricing engine as the calculator.

An 8,000 sq ft auto repair shop with a 5,000 sq ft 4-bay shop area, a 1,500 sq ft customer waiting room and office, a 1,000 sq ft parts storage area, and 500 sq ft of restrooms and hallway. 2 restrooms. Cleaned 3x per week. Floor: 80% sealed concrete (shop, storage), 10% carpet (waiting room), 10% tile (restroom, office). Shop bay degreasing is quoted separately. The work itself comes to 1.33 hours a visit, under the 1.5 billable hours SolidBid charges for every visit, so the example is priced at 1.5 hours a visit.

Auto Repair Shop8,000 sq ft, 3x per week
How the monthly price for this example building is built
Line and how it’s worked outPer month
Labor1.33 hours a visit × 12.99 visits a month × $16.00 an hour, plus 30% for payroll taxes and workers’ comp$359
Supplies$0.01 per sq ft a month for paper, soap, liners and chemicals$80
Overhead15% of labor and supplies, for the van, equipment, insurance and office$66
Profit and minimum chargeSolidBid bills at least 1.5 labor hours a visit, so the price is higher than the work alone. The work by itself comes to $594 a month.$152
Monthly price$0.082 per sq ft a month$657

What the price covers

  • Mopping (Wet): 2,160 sq ft of traffic lanes and entrances, every visit
  • Restroom Cleaning: 6 fixtures, every visit
  • Trash Removal: 16 trash cans, every visit
  • Lobby / Entrance Cleaning: 1 lobby, every visit

This is an example, not a quote. Wages, building conditions, restroom counts and scope all move the price, and the calculator lets you change each one.

Price this building with your own numbers.

The calculator starts from this example: 8,000 sq ft at 3x per week, with the same wage, margin and counts, so it shows the same price. Then enter what you pay and change anything that doesn’t match the building you’re bidding.

Open the calculator

What buildings like this usually cost.

Benchmark range

$0.045 - $0.095 per sq ft per month at 3 visits a week

Where it comes from

An estimate from SolidBid's cost model, not a published rate

A price outside the range isn’t wrong on its own. Wages, restroom counts and scope move it. The calculator’s price check shows where a price sits against a range like this one.

Common scope of work.

Items to list in the proposal, so the client knows exactly what the price includes.
  1. Degrease and scrub shop bay floors with industrial degreaser
  2. Vacuum customer waiting area carpet
  3. Mop office and tile floor areas
  4. Clean and sanitize restrooms (restock supplies)
  5. Clean customer waiting area (furniture, magazines, coffee station, TV area)
  6. Clean front counter and office surfaces
  7. Empty all trash receptacles (shop and office)
  8. Sweep parts storage area
  9. Clean entrance and transition zone mats
  10. Spot clean customer-area glass and windows
  11. Monthly: shop floor deep degrease, waiting room carpet spot treatment
  12. Quarterly: shop floor machine scrub, waiting room deep carpet clean

Get the walkthrough checklist for auto repair shop cleaning

A free printable PDF to fill in on site: the counts the calculator asks for, the questions that change the price, and a page for notes and a floor sketch.

We’ll also send occasional emails about pricing cleaning bids. Unsubscribe any time.

Common questions.

How much does auto repair shop cleaning cost?

In the worked example above, an 8,000 sq ft auto shop cleaned 3x per week comes to $657 a month for the customer areas, restrooms, and routine floor care. The work itself is under 1.5 hours a visit, so the price is set by SolidBid's floor of 1.5 billable hours per visit. The shop bay floor cleaning is the biggest variable: light degreasing costs less than deep floor restoration. Customer areas are priced at standard office rates. If the shop wants daily customer area cleaning with 3x shop floor service, offer a split-frequency bid.

What products work best for auto shop floor cleaning?

Industrial alkaline degreasers (Purple Power, Zep Industrial Purple, or similar) are standard for auto shop floors. For heavy oil stains, apply straight degreaser and let it dwell 5-10 minutes before scrubbing with a deck brush or floor machine. For daily maintenance, diluted degreaser with a mop works for light residue. Avoid citrus-based cleaners on sealed concrete, because they can break down the sealant.

Should I include the shop bays in my cleaning bid?

Always price them as a separate line item. Some shops only want customer area cleaning and handle shop bays internally. Others want everything under one contract. By separating the items, you give the owner flexibility and show you understand the difference in scope. Shop bay cleaning is physically demanding and requires different equipment than office cleaning, so price it accordingly.

Price this building now. It’s free.

No signup to see the price. When it’s right, the Bid Kit turns it into a proposal ready to send.

Open the calculator