Skip to content
SolidBidGet a free price

Pricing guide

How to Bid on Data Center Cleaning

Data center cleaning is a highly specialized niche with strict contamination control requirements similar to clean rooms. Dust is the enemy of server equipment. It clogs cooling systems, causes overheating, and leads to equipment failure. The cleaning frequency is low (often weekly or bi-weekly), the spaces are small relative to the equipment value, and the rates are premium. One mistake with static electricity or a careless bump to a server rack can cause thousands of dollars in damage or downtime.

Worked example

$852a month

Data Center, 5,000 sq ft, 1x per week, with a $22.00 hourly wage.

See how it adds up
Typical size
1,000 to 20,000 sq ft
Usual frequency
Weekly for most data centers; some require bi-weekly
Benchmark range
$0.09 - $0.135 per sq ft per month at 1 visit a week
Where this range comes from

What to watch for.

The things that most often change the price of this kind of building.
  1. Anti-static equipment and procedures

    Static discharge can damage or destroy server components. Your crew must wear anti-static wrist straps, use anti-static vacuum cleaners (HEPA-filtered with anti-static hoses), and use only approved cleaning products. Standard cleaning equipment generates static that is dangerous in a data center environment. The equipment investment is specialized but essential.

  2. Raised floor and under-floor cleaning

    Many data centers have raised floors with cable runs and cooling airflow underneath. Under-floor cleaning requires lifting floor tiles (training needed) and vacuuming debris from the plenum space. This is slow, meticulous work: each tile lift and replace takes 2-3 minutes, and you may need to clean under dozens of tiles per visit.

  3. Restricted access and escort requirements

    Data centers restrict physical access for security reasons. Your team will likely need escort by data center staff, background checks, and signed NDAs. Some facilities require advance scheduling days or weeks ahead. The limited access windows and escort requirements reduce your scheduling flexibility.

  4. Temperature and humidity conditions

    Data centers maintain controlled environments (65-75 degrees F, 40-60% humidity). Your crew works in these conditions, which are comfortable but constant. More importantly, your cleaning methods cannot introduce moisture or humidity changes that could affect the environment. Wet mopping is typically prohibited, so use dry and damp methods only.

How long the work takes.

The worked example starts from times based on ISSA's 540 Cleaning Times: dust mopping at 6,500 sq ft per hour, horizontal dusting at 3,750 sq ft per hour, high dusting at 2,000 sq ft per hour.

SolidBid applies a difficulty multiplier for this facility type (the range is 1.5-2x, and the calculator uses the low end). Weekly tasks such as dusting are spread across the week's visits.

Dry methods only: the example uses dust mopping, not wet mopping, because moisture is a risk. HEPA vacuuming of server tops, under-floor work, and anti-static procedures add time, so price them from the hours they take.

A worked example.

Every line is worked out by the same pricing engine as the calculator.

A 5,000 sq ft data center with a 3,000 sq ft server room (raised floor), a 1,000 sq ft network and equipment room, and 1,000 sq ft of support areas. Cleaned 1x per week with dry methods only. The price covers weekly dust mopping, dusting, and monthly high dusting. HEPA vacuuming and under-floor work are not priced separately. At $0.170 per sq ft this example sits about 26% above the top of the printed range, and SolidBid's price check flags it as above range. Small buildings usually cost more per square foot than published ranges assume, and this one is 5,000 sq ft, so some of the gap is expected.

Data Center5,000 sq ft, 1x per week
How the monthly price for this example building is built
Line and how it’s worked outPer month
Labor4.22 hours a visit × 4.33 visits a month × $22.00 an hour, plus 35% for payroll taxes and workers’ comp$543
Supplies$0.01 per sq ft a month for paper, soap, liners and chemicals$50
Overhead15% of labor and supplies, for the van, equipment, insurance and office$89
Profit20% of the final price, a true margin rather than a markup$170
Monthly price$0.170 per sq ft a month$852

What the price covers

  • Dust Mopping: 5,000 sq ft, weekly
  • Dusting (Horizontal Surfaces): 5,000 sq ft, weekly
  • High Dusting: 5,000 sq ft, monthly

This is an example, not a quote. Wages, building conditions, restroom counts and scope all move the price, and the calculator lets you change each one.

Price this building with your own numbers.

The calculator starts from this example: 5,000 sq ft at 1x per week, with the same wage, margin and counts, so it shows the same price. Then enter what you pay and change anything that doesn’t match the building you’re bidding.

Open the calculator

What buildings like this usually cost.

Benchmark range

$0.09 - $0.135 per sq ft per month at 1 visit a week

Where it comes from

An estimate from SolidBid's cost model, not a published rate

A price outside the range isn’t wrong on its own. Wages, restroom counts and scope move it. The calculator’s price check shows where a price sits against a range like this one.

Common scope of work.

Items to list in the proposal, so the client knows exactly what the price includes.
  1. HEPA vacuum all raised floor surfaces with anti-static equipment
  2. Under-floor plenum vacuuming (rotating section schedule)
  3. HEPA vacuum server rack tops and accessible cable management surfaces
  4. Clean network and equipment rooms with anti-static methods
  5. Clean office and support areas (standard cleaning)
  6. Clean break room
  7. Clean and sanitize restroom (restock supplies)
  8. Empty all trash receptacles
  9. Wipe high-touch surfaces with anti-static wipes
  10. Monthly: full under-floor cleaning rotation complete, above-cabinet detail
  11. Quarterly: ceiling tile inspection, light fixture cleaning, full rack surface detail

Get the walkthrough checklist for data center cleaning

A free printable PDF to fill in on site: the counts the calculator asks for, the questions that change the price, and a page for notes and a floor sketch.

We’ll also send occasional emails about pricing cleaning bids. Unsubscribe any time.

Common questions.

How much does data center cleaning cost?

In the worked example above, a 5,000 sq ft data center cleaned weekly comes to about $852 a month. HEPA vacuuming and under-floor cleaning add hours, and you price them from the time they take. Larger data center campuses with multiple rooms cost more.

What equipment do I need for data center cleaning?

At minimum: HEPA-filtered vacuum with anti-static hose and attachments, anti-static wrist straps for all workers, floor tile lifters, anti-static wipes and cleaning agents, and non-linting cleaning materials. Standard janitorial equipment is not allowed in data center server rooms. Budget for the initial equipment before you bid.

Can data center cleaning damage server equipment?

Yes, if done improperly. The main risks are: static discharge (mitigated by anti-static equipment and grounding), physical bumping of server racks (training on careful movement), moisture introduction (use dry/damp methods only, never wet mop), and airborne particle distribution (HEPA filtration prevents this). Proper training and equipment eliminate these risks, but your insurance should specifically cover data center environments. Most data center operators require proof of appropriate coverage.

Price this building now. It’s free.

No signup to see the price. When it’s right, the Bid Kit turns it into a proposal ready to send.

Open the calculator